How to Take Product Photos With Your Phone That Don’t Look Cheap

Most product photos that look cheap don't have a camera problem. Today's phones take sharp pictures. The problem is usually the light, the background or the angle, and all three are free to fix. Here's what I'd tell any small business owner shooting their own products.

1. Use window light, not overhead light

Overhead room lights and your phone's flash make harsh shadows and odd color casts. Instead, set the product near a large window with indirect daylight. Turn off the room lights so you aren't mixing warm and cool light.

If the sun is shining straight in, hang a thin white sheet or shower curtain over the window to soften it. Overcast days are your friend.

2. Keep the background plain

A busy counter or garage shelf pulls attention away from the product. A large sheet of white or light gray poster board works well. Bend it into a curve so it runs up the wall behind the product and under it, with no visible corner. That curve is called a sweep, and it's what studios use too.

Put a second white board on the side opposite the window to bounce some light back into the shadows.

3. Shoot at the product's height

Shooting down from standing height makes products look small and distorted. Get the phone level with the middle of the product. For small items, that means sitting down or putting the product on a box.

Step back a little and use your phone's 2x lens if it has one. The phone's main lens is wide-angle, and close up it bends edges and makes the parts closest to the lens look too big.

4. Hold still, focus and clean the lens

  • Wipe the lens with a soft cloth first. A fingerprint smudge on the lens is a common cause of hazy photos.

  • Tap the screen on the product to set focus, then slide exposure down slightly if white areas look blown out.

  • Lean your elbows on something or use a cheap phone tripod, and use the self-timer so your tap doesn't shake the shot.

5. Prep the product

Dust, fingerprints and wrinkled labels show up clearly in photos. Wipe the product down, peel off price stickers and straighten anything that should look new.

6. Use the same setup every time

One great photo next to five different-looking ones still makes a store look messy. Mark where the product, the boards and the phone go with tape, and shoot every product the same way. A consistent set of photos looks far more professional than any single shot.

7. Take more than you need

Shoot the front, the back, the details and a few angles in between. Photos are free, and a reshoot isn't. Pick the best ones later on a bigger screen.

The short version

Good light, a plain background, the right height and the same setup every time will take you most of the way. When you're ready for lifestyle shots of your gear out in the real world, that's where a dedicated shoot helps.

Need product photos for a launch or a store refresh? See product photography or send me a note.

Previous
Previous

Editing Product Photos and Videos on a Budget: Canva and CapCut

Next
Next

Case File: Tropicana’s $33 Million Carton